Browse all practice questions for the Alarm Monitor Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Alarm Monitor Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What is a Motion Detector?
  • Which resources are referenced when discussing alarm response times in this context?
  • Which keyboard shortcut combination is used to add and delete responders to/from the favorites list?
  • Which agency is NOT listed among those involved in UNMANNED activation procedures?
  • If multiple alarms are received what designates the current selected alarm?
  • Alarm Custodians are contacted in what order?
  • Who should be contacted for alarm activations off-base?
  • Which device is used to report the status of polled devices back to the Vindicator?
  • What is a nuisance alarm?
  • Which option delays all items in the Attention List?
  • What will happen to an alarm point once it returns to normal in the Alarms list?
  • During an Anti-Robbery/Alarm Activation, what information should the Alarm Monitor obtain from the caller?
  • When are owner/user pin codes utilized?
  • Which option best describes the Alarm Monitor's primary duties?
  • How is the Tampers list sorted?
  • During a UNMANNED unannounced alarm activation response what are the patrols responsibilities once on scene?
  • During an UNMANNED unannounced alarm activation, what actions are taken if the listed agencies are involved: Defense Courier, Defense Logistics Agency, AAFES, DeCA, Post Office, Bank of Guam, or Pentagon Federal Credit Union?
  • Which action should the Alarm Monitor take at each shift change?
  • During a UNMANNED unannounced alarm response, when is an exterior walk-around conducted?
  • What is the ESS NCO responsible for?
  • During an UNMANNED unannounced alarm activation, if the alarm fails to reset what action is taken?
  • Which of the following is NOT listed as a component of the IDS system?
  • What is the same for all facility duresses?
  • What does Green color indicate in the alarm color coding?
  • What must the operator do with each alarm during an alarm test?
  • What needs to be accomplished immediately after receipt of an alarm activation?
  • When can you tag an alarm?
  • Which term best describes a PL-3 resource?
  • Who is responsible for the security of alarmed facilities?
  • Which scenario is an example of a Partial Failure?
  • During an UNMANNED unannounced alarm activation what information is obtained from the Alarm Custodian?
  • In a BDOC relocation, which building will host the Alarm Monitor and Controller?
  • To postpone just one item temporarily, you should choose:
  • What is a Microwave Sensor?
  • How are alarms received?
  • Which keyboard shortcut deletes responders from the favorites list?
  • Where would events that require the operator's attention be located?
  • During an alarm activation, what is the immediate action required by the operator?
  • What does the Summary Window on the VCC provide?
  • When the battery switches from primary power to alternate power will it register as an intrusion alarm? Why/Why not?
  • When will the Alarm Monitor make contact with the Alarm Custodian during an unannounced alarm activation response?
  • If an alarm point is removed from the Troubles list, it might still appear on which list?
  • Which are two examples of PL-1 resources?
  • During an UNMANNED unannounced alarm activation when is the alarm custodian contacted?
  • What does Red color indicate in the alarm color coding?
  • What is a false alarm?
  • Who can test tamper devices?
  • What do Upper case letters indicate in the Vindicator system?
  • During a MANNED facility unannounced alarm response, under what condition can 360-degree coverage be broken?
  • Which item represents a PL-4 resource related to hazardous materials?
  • How should mis authentication situations be treated?
  • Catastrophic failures and major malfunctions containing PL 1 & 2 resources must be repaired to what level within what time?
  • What is the next step after an Alarm Custodian properly authenticates during a MANNED unannounced alarm activation?
  • When an unannounced alarm occurs, what action should be taken immediately?
  • What does "Secure" mean?
  • Which of the following is an example of a PL-2 resource?
  • In a BDOC relocation, which item is carried by the Alarm Monitor to the Alternate BDOC?
  • Which action would postpone only the current item while leaving others unaffected?
  • Which of the following is a prohibited radio practice?
  • Which statement about Defer All is true?
  • Which of the following is an example of a PL-3 resource?
  • Where can an operator find information regarding received messages from Vindicator concerning polled devices?
  • Give an example of how to properly authenticate with on-duty SF.
  • Where would events that require action by the operator be located?
  • Which option temporarily delays every item in the Attention List for later review?
  • Duress tests are logged on which form?
  • How long do hardwired/remote duress devices have to be depressed for?
  • When are owner/user pin codes utilized?
  • Which device is described as a buried ported coax sensor used to detect boundary penetrations?
  • During a Catastrophic Failure, what instruction will the alarm monitor give to alarm custodians?
  • Motion detectors use which technologies?
  • Which of the following is NOT a PL-4 resource?
  • Which facilities are not required to post anyone when alarms are inoperable?
  • Which color denotes Blue in the alarm color coding, representing unacknowledged or acknowledged trouble, comm failure, or test failure?
  • What is the purpose of the 'Acknowledge' method?
  • What do lower case letters indicate in the Vindicator system?
  • How are authentication codes used?
  • How often must batteries be tested?
  • Which alarms will patrols be dispatched to?
  • When a vindicator network poll results in a loss of communication what does the Vindicator receive?
  • Who must immediately be contacted if a major malfunction occurs?
  • In secure mode, what color is the keypad indicator light?
  • How many digits does the keypad code use?
  • What are Human Error Alarms?
  • In the event of a BDOC relocation, what will the Alarm Monitor take to Alternate BDOC?
  • Which statement best describes who maintains the Alarm Response Priority listing?
  • Which action is initiated by the 36 SFS QRC Catastrophic Alarm Failure?
  • How are alarms listed in the Alarms list?
  • What is a Data Transmitter?
  • What are some examples of Comm. Failures?
  • Which option best describes the Microwave Sensor's function within the system?
  • Which list contains events that require operator action?
  • Within what timeframe will alarm maintenance personnel respond for major malfunctions dealing with PL 1 & 2 resources?
  • What is a Catastrophic Failure?
  • When alarm points are removed from the Troubles list what might they not be removed from?
  • Pin codes are changed under what conditions and coordinated through whom?
  • Which PL-4 resource example includes storage areas for POL?
  • Which statement best describes a PL-4 resource?
  • If you want to postpone every item in the list, which option do you select?
  • What is the definition of a PL-1 resource?
  • For Activation of Alternate BDOC what needs to be initiated?
  • Which action defers all items in the Attention List?
  • What is the definition of a PL-4 resource?
  • Which of the following is a PL-4 resource?
  • During a vindicator poll, when communications are lost, what information does the Vindicator receive?
  • Which of the following best describes the scope of PL-1 resources?
  • Which events require the operator's attention?
  • Which keyboard shortcut adds responders to the favorites list?
  • How often are authentication codes changed?
  • How are Test Failures sorted?
  • How many times can an authorized individual enter the access code before it is considered Human Error?
  • During an UNMANNED unannounced alarm activation of a facility containing weapons or classified material, if the alarms fail to reset, what must the owner be equipped with?
  • Which resources are referenced when discussing alarm response times in alarm maintenance context?
  • In the event of a BDOC relocation, to which building will the Alarm Monitor and Controller relocate?
  • Which option defers all items in the Attention List?
  • How do you display a map?
  • How are responders added/deleted to the favorites list?
  • What list is a subset of the Alarm Point list?
  • Who is responsible for the security of alarmed facilities?
  • Which statement about the four digit keypad duress code is true?
  • Which events are explicitly listed as requiring operator attention?
  • What is the maximum nuisance alarms per sensor point in the last 30 days?
  • Who maintains the Alarm Response Priority listing?
  • Within what timeframe will alarm maintenance personnel respond for catastrophic alarm failures dealing with PL 1 & 2 resources?
  • How often will the Installation Commander duress be tested?
  • Which statement best defines a Major Malfunction?
  • In the Alarms list what does the color coding indicate?
  • Which statement best describes when tagging an alarm is appropriate?
  • In the alarm color coding, which color is associated with Trouble, Communication Failure, or Test Failure?
  • In the VCC system, what indicates that an alarm has been detected?
  • How are authentication codes used?
  • What is the purpose of a Helping Hand security incident?
  • Which statement about signs of Duress for CP is NOT true?
  • What is the primary purpose of the Attention List?
  • Which PL-4 resource involving air traffic control navigational aid facilities?
  • Which organizations should be notified about alarm failures or communications outs?
  • Selecting Defer All will impact which of the following?
  • Which description best defines a Partial Failure?
  • What happens when you choose Defer on an item?
  • What is located in the Alarm Panel?
  • What is a Covered Wagon?
  • In alarm terminology, what does Access mean?
  • What is the definition of a PL-3 resource?
  • Authentication codes should be changed at what interval?
  • Which statement correctly explains how alarm activations should be treated when there is no directive otherwise?
  • How does the VCC alert the operator of an alarm?
  • Which of the following is an accurate example of PL-1 resources?
  • How does a user reset a duress alarm?
  • During an unmanned alarm response, exterior walk-around is performed after what condition is established?
  • During a MANNED unannounced alarm response who conducts a walkthrough of the facility to ensure all is in order?
  • How often is duress testing performed?
  • What is the purpose of the Comm. Failures List in the system?
  • Which color represents Access Pending or Alarm point in Access?
  • What does Yellow color indicate in the alarm color coding?
  • What is the false alarm rate?
  • What are the types of alarm system failures?
  • What are considered signs of Duress for CP?
  • In the Alarms list what do the colors mean?
  • What does the Alarm Monitor watch on the VCC?
  • Where can Tamper alarms be found?
  • Which facilities require a daily duress test?
  • When a keypad is in 'access' mode, what color is the light?
  • For a maintenance response, when can the operator call the IDS contractor?
  • What is a Partial Failure?
  • What should be annotated in the pass-on book?
  • What actions will be taken if an Alarm Custodian refuses to provide security for their resources during a Catastrophic Alarm Failure?
  • What list displays all the alarm points in the system?
  • In the on-duty SF authentication example, what is the patrolman’s response mapped to 'T'?
  • Which action defers only the currently selected item in the Attention List?
  • What classification are alarm codes designated?
  • In the Alarms list what happens when an alarm point goes back to normal status?
  • If you want to delay every item for later review, which option should you pick?
  • Which list are subsets of the "Attention List"?
  • Where can you locate all alarm points currently in alarm state?
  • If the Alarm Custodian mis authenticates during a MANNED unannounced alarm response, what action should be taken?
  • Who establishes and maintains pin codes?
  • What will the Troubles list contain?
  • For alarm activations involving all alarms other than AA&E what are the IEC procedures?
  • During multiple alarm activations, patrols are dispatched in what order?
  • BDOC is categorized as which type of PL resource?
  • If medical assistance is required during an alarm activation, what should be done?
  • Which of the following is a component of the IDS system?
  • Keypads mounted independently from the alarm pane are not protected by which device?
  • What will indicate a malfunction alarm in the VCC?
  • What is the nuisance alarm rate?
  • If a door with an open/shut sensor is open and the sensor is still active, why can't the door be fully secured?
  • Which document records the custodian's refusal to provide security during catastrophic failure?
  • How long do users have to enter their code into the keypad after accessing an alarmed facility?
  • Which option best describes a Data Transmitter's role within the system?
  • When is an alarm removed from the "Action List" and the "Alarm List"?
  • Which document is used to log duress testing?
  • What is the Balanced Magnetic Switch used for?
  • What constitutes mis authentication?
  • Which of the following options would not apply a defer action to the Attention List?
  • Which item is used to contact alarm custodians?
  • When will alarms be removed from the Alarm Point list?
  • Which statement best describes Defer All?
  • Who accompanies the user on a physical inspection during UNMANNED alarm activation?
  • How often are AA&E facility alarms tested?
  • Which option would postpone all items in the Attention List at once?
  • Which scenario could be considered a Security Incident?
  • What is the definition of a PL-2 resource?
  • What is a Helping Hand (Security Incident)?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy